Drehmo c-matic Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Adapter Drehmo c-matic. Drehmo c-matic 20 stron. Usb-adaptor kit for actuators with integrated control unit
Drukuj stronę- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
Serial communication is supported on the PC side by means of separate software. Available
are the software tools i-matic Explorer and Matic C Operator. The corresponding user
manuals have to be observed.
1.2.2 Delivery content
The adaptor kit comprises an USB cable with a DREHMO specific programmed USB-serial
converter and three different adaptor units SER01, SER02, SER03.
A separate adapter cable SER04 for the use in combination with the i-matic modbus loop
interface unit DiM - 17 is furthermore available:
DREHMO
Instruction manual for USB adaptor kit
page 4 of 20