Drehmo c-matic Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Adapter Drehmo c-matic. Drehmo c-matic 20 stron. Usb-adaptor kit for actuators with integrated control unit
Drukuj stronę- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
The following table gives a reference overview for the adapter usage in combination with the
various electronic units.
Adaptor unit
reference
SER01
DMC - 02.x
from revision 5
DMC - 14
DiM - 09
DMC - 30
DiM - 24
SER02
DiM - 02
DiM - 22
SER03
DMC - 02.x
all revisions
SER04
DiM - 17
Remark:
A connection to the units DiM – 09, DMC – 30 and DiM – 24 is only allowed for
especially trained staff. The usage of the given tools by strictly following the
instruction manuals of the electronic units is required. Otherwise, the intended
function of the units may be disturbed.
1
WinGate - Tool of company Deutschmann Automation
2
Flash Magic – Tool of Embedded Systems Academy / Philips Semiconductors
DREHMO
Instruction manual for USB adaptor kit
unit
function
Matic C
base plate
Matic C
profibus DP-V1
i-matic
DeviceNet
Matic C
LCD display unit
i-matic
accumulator unit
i-matic
display unit IR / IrII
i-matic
display unit
Bluetooth
Matic C
base plate
i-matic
modbus loop unit
unit
PC-Tool
connector
X11
Matic C
(lower side)
Operator
TEST
Matic C
Operator
X2, X3
WinGate
CN1
Flash
Magic
CN1
Flash
Magic
X2
i-matic
Explorer
X2
i-matic
Explorer
X6
Matic C
(upper side)
Operator
XT
i-matic
Explorer
chapter
3.1.1
3.1.2
1
3.1.3
3.1.4
2
3.1.5
2
3.2.1
3.2.2
3.3.1
3.4.1
page 5 of 20