Electrolux EHC644BA Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Electrolux EHC644BA. Electrolux EHC644BA 20 stron. Ceramic glass hob

Drukuj stronę
OPERATING INSTRUCTIONS
using the automatic warm-up function
All cooking zones are equipped with an automatic warm
up function When setting a heat setting using
starting from
, the cooking zone switches to full power
for a certain amount of time and then automatically
switches back to the heat setting set.
Switch on (only when starting at
Switch off
Not used
ImPOrTANT!
If during the automatic warm up
is selected, e.g. from
to
is adjusted.
ImPOrTANT!
If there is still residual heat on the cooking zone (display
the automatic warm up is not performed.
The length of time that the automatic warm up function
Heat setting
operates depends on the heat setting selected.
The child safety device
The child safety device prevents unintentional use of the
appliance.
Switching on the child safety device:
• Start the hob with . Do not set the heat settings.
• T ouch
for 4 seconds. The symbol
• The child safety device is switched on.
Switching off the child safety device:
• S tart the hob with . Do not set the heat settings.
Touch
for 4 seconds. The symbol
• Stop the hob with .
• The child safety device is switched off.
ImPOrTANT!
The child safety device can only be switched on and off, if no
heat setting is set.
, when
Control panel
)
Touch
Touch
Touch
a higher heat setting
, the automatic warm up
Length of the automatic warm up (min:sec)
0:30
1:00
1:40
4:50
6:30
10:10
2:00
3:30
4:30
---
comes on.
comes on.
Display
to
to
/
to
),
Overriding the child safety device:
The child safety device can be switched off in this way for
a single cooking session; it remains activated afterwards.
• Start the hob with . The symbol
• T ouch
for 4 seconds. The symbol
Until the appliance is next switched off, it can used as
normal. After switching off the appliance, the child safety
device is active again.
ImPOrTANT!
After overriding the child safety device, a heat setting or a
function must be set within approx. 10 seconds, otherwise the
appliance automatically switches itself off.
Pilot light
(after 5 seconds)
to
to
comes on.
comes on.
9