andover Model-One Instrukcja obsługi produktu - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Stojaki i stojaki andover Model-One. andover Model-One 19 stron. Modular stand system
Również dla andover Model-One: Instrukcja obsługi produktu (14 strony), Instrukcja obsługi produktu (8 strony)

andover Model-One Instrukcja obsługi produktu
STEP 7 - Install the Cover
Insert the dust cover fully into the two hinges.
Bluetooth
To pair your device:
1. Press the central knob and select Bluetooth in the source menu.
2. Enter Bluetooth pairing mode on your device per your device's instructions.
3. You device should soon recognize "Andover Model-One". When recognized,
select it on your device to connect.
4. Use your device to play an audio signal. Be aware that your device's volume
control may still operate in addition to the volume control on Model One, so
if you do not have adequate volume, make sure your device is turned up to a
reasonable level. It is best set your device to its maximum or near maximum
volume, and use the Model-One volume to adjust your listening level.
If Model-One does not show up on the Bluetooth screen of your device the Model-One
may be already connected to another paired device within range. You must disconnect
from the undesired device before Model-One will accept a new connection request. This
must be done from that device. If you are certain this is not the case, exit Bluetooth mode
and reselect it to restart the scan process.
Recording to, or playing from a Personal Computer:
You may use Model One to record your music to a personal computer, or play from your
hard drive or streaming sites. Connect a USB-Mini B to USB-A cable from the PC jack on
Model-One to a USB jack on your PC or Mac. If your computer is using a contemporary
operating system, Model-One will not require any special drivers or software. It will
emulate an external soundcard so that it may be used with any software you choose.
On your personal computer, enter the SOUND menu from within your Control Panel or
System Preferences. Select "USB CODEC" as the INPUT device for recording, and as the
OUTPUT device for playback. You may now use built in apps such as Windows Media
Player or Quicktime to record or playback from whatever source you have selected on
Model One.
If you desire additional functionality, there is a variety of software and freeware available
on the internet such as Audacity (www.audacityteam.org), which will provide features
such as pop suppression, format conversion, and track splitting. You are free to use
whatever software you like that is compatible with your computer's operating system.
Page 15