andover Model-One Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стойки и подставки andover Model-One. andover Model-One 19 страниц. Modular stand system
Также для andover Model-One: Руководство по эксплуатации (14 страниц), Руководство по эксплуатации (8 страниц)

STEP 7 - Install the Cover

Insert the dust cover fully into the two hinges.

Bluetooth

To pair your device:

1. Press the central knob and select Bluetooth in the source menu.

2. Enter Bluetooth pairing mode on your device per your device's instructions.

3. You device should soon recognize "Andover Model-One". When recognized,

select it on your device to connect.

4. Use your device to play an audio signal. Be aware that your device's volume

control may still operate in addition to the volume control on Model One, so

if you do not have adequate volume, make sure your device is turned up to a

reasonable level. It is best set your device to its maximum or near maximum

volume, and use the Model-One volume to adjust your listening level.

If Model-One does not show up on the Bluetooth screen of your device the Model-One

may be already connected to another paired device within range. You must disconnect

from the undesired device before Model-One will accept a new connection request. This

must be done from that device. If you are certain this is not the case, exit Bluetooth mode

and reselect it to restart the scan process.

Recording to, or playing from a Personal Computer:

You may use Model One to record your music to a personal computer, or play from your

hard drive or streaming sites. Connect a USB-Mini B to USB-A cable from the PC jack on

Model-One to a USB jack on your PC or Mac. If your computer is using a contemporary

operating system, Model-One will not require any special drivers or software. It will

emulate an external soundcard so that it may be used with any software you choose.

On your personal computer, enter the SOUND menu from within your Control Panel or

System Preferences. Select "USB CODEC" as the INPUT device for recording, and as the

OUTPUT device for playback. You may now use built in apps such as Windows Media

Player or Quicktime to record or playback from whatever source you have selected on

Model One.

If you desire additional functionality, there is a variety of software and freeware available

on the internet such as Audacity (www.audacityteam.org), which will provide features

such as pop suppression, format conversion, and track splitting. You are free to use

whatever software you like that is compatible with your computer's operating system.

Page 15