Atlas Copco 8431035021 Instrukcje dotyczące produktu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcje dotyczące produktu dla Elektronarzędzie Atlas Copco 8431035021. Atlas Copco 8431035021 12 stron.

W2621

Installation

■

For optimum performance and maximum product life we recommend the use of compressed air with

a maximum dew point of +10°C (50°F). We also recommend to install an Atlas Copco refrigeration

type air dryer.

■

Use a separate air filter which removes solid particles larger than 30 microns and more than 90% of

liquid water. Install the filter as close as possible to the product and prior to any other air preparation

units to avoid pressure drop.

For impulse/impact tools make sure to use lubricators adjusted for these tools. Regular lubricators

will add too much oil and therefore decrease the tool performance due to too much oil in the motor.

Make sure that the hose and couplings are clean and free from dust before connecting to the tool.

Both lubricated and lubrication free products will benefit from a small quantity of oil supplied from a

lubricator.

Brand

Atlas Copco

Shell

WARNING Compressed air can cause serious injury

Always shut off the air supply, drain hose of air pressure and disconnect the tool from air supply;

►

when not in use, before making any adjustments to the product - for example changing acces-

sories, or when making repairs.

WARNING Whipping hoses can cause serious injury

Always make sure that there are no damaged or loose hoses or fittings.

►

WARNING Compressed Air

High air pressure can cause severe damage and bodily injury.

Do not exceed maximum air pressure.

►

Make sure that there are no damaged or loose hoses or fittings.

►

For correct air pressure and hose size, see section Technical data.

Make sure that the hose and couplings are clean and free from dust before connecting to the tool.

Air lubrication

Optimizer (1 liter) 9090 0000 04

Chopin 46

Shell Air Tool Oil S2 A 320

Installation