Bose CineMate GS Series II Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Bose CineMate GS Series II. Bose CineMate GS Series II 38 stron. Digital home theater speaker system
Również dla Bose CineMate GS Series II: Lista kodów (28 strony), Podręcznik szybkiej konfiguracji (2 strony), Instrukcja obsługi (50 strony), (Angielski) Podręcznik użytkownika (32 strony)

English

TAB 2

Connecting a single source device

Use this type of connection only if you use a single

audio/video source device. Make the highest-quality

audio connection your device can support.

Using optical cable for best audio quality

Optical cable provides digital audio performance.

1. Insert one end of the supplied optical cable into the

Optical Audio Out connector on your device. (This

audio connector may be marked "Digital Audio.")

2. Insert the other end of the cable into the OPTICAL IN

connector on the interface module.

TAB 3

TAB 4

Be sure to

press firmly

until the plug

clicks securely

into place on

the interface

module.

TAB 5

TAB 6

Device settings for digital audio

When connecting your device using the optical cable,

you may need to change settings on the device for the

correct output.

In the audio menu for each device, make these

adjustments as needed.

1. For the output format, choose Dolby Digital 5.1,

PCM 2.0, or Bitstream.

Dolby Digital offers the highest quality and PCM

provides the next best.

2. Make sure the audio sample rate setting is no

higher than 48kHz.

3. Make sure the correct digital audio output on the

source device is selected.

For details, refer to the owner's manual provided

with your device.

TAB 7

TAB 8

YSTEM

ETUP