Advanced Radio I Charger Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Advanced Radio I Charger. Advanced Radio I Charger 9 stron.

I Charger Safety Features

Battery over temperature safety.

I Charger has provision for Lithium battery temperature moni-

toring. This feature monitors battery pack temperature using

the optional temperature sensor. You simply attach an optional

temperature probe to the battery with tape and if the battery

temperature moves outside a safe charging range of 0°C to 40°C

or 104° Fahrenheit , the I Charger suspends charging and signals

fault condition (Red

LED). Once temperature returns to the safe

range then charging will continue.

Battery Bad Detection

I Charger also has bad battery detection, which triggers a

fault (Red LED)

if a battery stays in precondition mode for more

than one eighth (23 minutes) of the total charge cycle time.

Automatic Charger Over Temperature Safety

During the charge process the I Charger monitors each charger

board individually. If the temperature of an individual charge

board reaches a high temperature condition then the charge cur-

rent on that charge board is reduced to maintain a safe operating

temperature range. This applies to each individual charge board.

charge

Lets get started

Step 1

First note that the charge ports (Boards) are numbered from the

top down, so a three port charger will have the top charge port as

number one and the one below that number two and the bottom

one number three.

The LCD screen plate is above the number one charge port. The

LCD displays each battery's information also from top down and is

indicated as B1, B2, B3 etc.

Charge Port B1

Charge Port B2

Charge Port B3

Display Board