Dronefly Inspire 1 v2.0 FPV Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do dronów i quadkopterów Dronefly Inspire 1 v2.0 FPV. Dronefly Inspire 1 v2.0 FPV 12 stron.

Drukuj stronę

INTRODUCTION

The great thing about our Inspire 1 v2.0 FPV kit is that it's very easy to install. Everything is plug-n-play. No soldering is required with this kit.

Installing this kit will not void your warranty with the drone. Our Inspire 1 FPV Kit uses a high quality Sony CCD camera.

The mount that attaches the FPV camera to your Inspire has tilting action, allowing you to adjust it between

ﬂights to ensure you get the right angle and ﬁeld of view. The video transmitter is a reliable 5.8Ghz 400mW video transmitter.

Light weight yet powerful. Optionally, included in this kit is the FlySight Black Pearl Diversity 7" Monitor.

Thanks to the included dual monitor mount for your controller, you can use two monitors at the same time, getting vision from both cameras.

Materials List

• Droneﬂy Custom FPV Pilot Camera

• Droneﬂy Custom FPV Video Transmitter

• Droneﬂy Custom Inspire 1 Mount (only compatible with Inspire 1

V2.0 and Pro)

• Droneﬂy Custom Dual Monitor Adapter for Inspire 1 Remote

• Black Pearl 7" FPV Diversity Monitor

• Power Cable Harness

• All needed mounting hardware

• Connector cables for the Inspire 1

• Dual Lock

• Detailed instructions on installation and operation Droneﬂy

Custom FPV Video Transmitter

Tools Needed

• 2.5mm Hex driver

• #00 Phillips Screwdriver

• Flathead Screwdriver