Dronefly Inspire 1 v2.0 FPV Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do dronów i quadkopterów Dronefly Inspire 1 v2.0 FPV. Dronefly Inspire 1 v2.0 FPV 12 stron.
Drukuj stronęOnce the Nose Cone has been removed, insert the red and black Power Plug of the FPV
Using a 2.5mm Hex bit remove the (qty 4) Nose Cone Bolts.
Wiring Harness into the open port of the Inspire 1.
Using a Phillips Screw driver remove the
Run the Power Leads under the Cables to the right to keep them tight, safe and away from the Compass.
(qty 2) Phillips screws below the Gimbal Vibration Damping Bracket.
Reattach the Nose Cone using all (qty 4) 2.5mm Bolts as well
Gently remove the Nose Cone of the Inspire 1.
as the (qty 2) Phillips Screws. Run the FPV Camera Lead down through the front of the Inspire 1.