Ankersmid Sampling AHL Series Podręcznik użytkownika - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Grzałka Ankersmid Sampling AHL Series. Ankersmid Sampling AHL Series 18 stron. Heated sample lines
Drukuj stronęK.
Installation guidelines
If the heated hose is too short, it will be bent
excessively at the connection ends.
Remedy:
1
Include a straight section (5 x hose diameter).
A large bending radius will increase the service
life of the hose.
Hose is laid with a sagging part.
Remedy:
Supports or rollers with counterweight.
2
CAUTION:
The heating tube may be not operated in
the rolled up condition or lying on top of
each other, because otherwise the outside
coat (Corrugated tube) can be destroyed.
3
Pulling at the end of a rolled up hose will result
in torsional stress and a bending radius smaller
than permissible.
Remedy:
Unroll the hose ring without pulling at the hose.
Observe minimum bending radius (5x hose
diameter).
Compression along the longitudinal axis due to
wrong installation or during movement will
reduce
the
pressure
compensation by fixed hoses leads to their
destruction.
Remedy:
Bends at connection points.
4
Wrong
Ankersmid Sampling
Neerlandweg 21
2610 Wilrijk
Belgium
resistance.
Stretch
Right
User Manual AHL, Edition 09/2016
www.ankersmidsampling.com
Page 15 of 18
Wrong
© Reproduction of this document or its content
is not allowed without permission of Ankersmid.
Technical Details Subject to Change
Right