DROPSA VIP4 Tools Instrukcja obsługi i konserwacji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Systemy smarowania DROPSA VIP4 Tools. DROPSA VIP4 Tools 17 stron.

Before shipment, the VIP4Tools/Air lubrication panels are carefully packed inside a cardboard box. During transport and

storage of the equipment, pay attention to the direction indicated on the box.

Upon receipt, check that the packaging is not damaged and store the equipment in a dry place.

13. PRECAUTIONS FOR USE

The warnings and risks that using the panel implies must be carefully read. The user must be familiar with

operation through the Operating Manual.

Electrical current

Do not carry out any operations on the machine before disconnecting it from the electrical power supply (on an

electrical level) and ensuring that no one can reconnect it during the operation.

All of the installed, electrical, electronic equipment, reservoirs and base structures must be connected to the

ground line. (see section 6.7).

Flammability

The oil used in the lubrication circuits is a fluid that is not normally flammable. In any case, all possible measures

must be taken to prevent it coming into contact with very hot parts or naked flames.

Pressure

Before any operation, check for the absence of any residual pressure in all branches of the lubricant circuit, that

could cause spurts of oil in the event that fittings or components are disassembled

(see section 6.6).

Noise

The VIP4Tools/Air lubrication panel does not emit excessive noise, remaining below 70 dB (A).

WARNING: before replacing the mini-pumps, remove the lubricant from the reservoir.

Characteristics

Pressure at the hook-up point

Max. quantity of particles in suspension

Max. diameter of the particles

Dew point

Max. quantity of oil in suspension

If natural-based oils compatible with prevailing health regulations are not used, the mixing pressure must be calibrated in

order to prevent the formation and dispersion of spray into the environment.

The approximate mixing pressure is between 1 bar (14.7 psi) and 2.5 bar (36.7 psi).

CHARACTERISTICS OF THE AIR

Operating Type

6 bar min (88.2 psi)

15 mg / Nmc

0.05

2° C (35.6 °F)

5 mg / Nmc