Absima CR6S Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pilot zdalnego sterowania Absima CR6S. Absima CR6S 17 stron. 2,4ghz radio system

Drukuj stronę

FEATURES:

2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.

Receiver response time is 3ms, ensuring a fast response and better control.

Smooth and highly sensitive to control inputs and stable at distances 400-500m

Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc.

With brake and fail safe out of control protection function.

Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.

Voltage range of transmitter: 4.8V - 12V (support 1s-3s battery), automatic identiﬁcation of voltage,

low voltage warning on 7.4V/4.8V

Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo.

Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed.

Channel 5 and 6 press for lock and press for release, function specially for Crawler accessories.

CHANNEL FUNCTION:

Simulator/

PPM interface

BASIC OPERATION:

Battery installation:

1. Open the battery compartment cover.

2. Insert 4 x "AA" batteries or 2S Li-Po batteries

with correct polarity. (No response if batterypolarity reversed)

3. Put back battery compartment cover

The battery socket is equipped with

anti-reverse insertion function,

wrong polarity connecton will not

damage the transmitter.

2S Li-Po rechargable battery pack

Channel 5

Power

On / Off

Rope

Channel 4

USB Connection

(only for up to 5V MAX.)

Channel 3

CH1: Reverse for steering

CH1: Sub-trim for steering

CH1: EPA for steering

Binding process:

1. Power on Transmitter

2. Power on Receiver and press button on side of receiver,

LED indicator fast ﬂashing means entering into

binding mode, the receiver will automatically

searching for the nearest transmitter signal for

Binding.

3 . The indicator will always ON after

successful bound.

Antenna

Channel 6

Channel 1 (Steering)

Channel 2 (Throttle)

Battery case

CH2: Reverse for throttle

CH2: Sub-trim for throttle

CH2: EPA for throttle

Binding button