anko BL9706-CB Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Blender anko BL9706-CB. anko BL9706-CB 8 stron.

17. To protect against risk of electrical shock do not put motor unit or power cord

in water or other liquid.

18. Do not use outdoors.

19. Keep hands and utensils out of container while blending to reduce the risk of

severe injury to persons or damage to the blender. A scraper may be used but must

be used only when the blender is not running.

20. To reduce the risk of injury, never place cutter-assembly blades on base without

jar properly attached.

21. Always operate blender with cover in place.

22.Warning: never use hot liquids or run the appliance empty.

23. Be care of potential injury from misuse.

24. Care shall be taken when handling the sharp cutting blades, emptying the bowl

and during cleaning.

25. Always disconnect the appliance from the supply if it is left unattended and

before assembling, disassembling or cleaning.

26. Switch off the appliance and disconnect from mains power before changing

accessories or approaching parts that move in use.

27. This appliance is intended to be used in household and similar applications

such as:

– Staff kitchen areas in shops, offices and other working environments;

– Farmhouses;

– By clients in hotels, motels and other residential type environments;

– Bed and breakfast type environments.

IMPORTANT!

Do not blend hot liquids.

Be careful if hot liquid is poured into the blender, it can be ejected out of the

appliance due to sudden steaming.

To prevent damage to the electric motor, the maximum operating time is 1

minute. Allow it to rest for at least 2 minutes before using it again. After 5

cycles of operation, allow the blender (electric motor) to cool down to room

temperature. Allow it to cool down for approx. 30 minutes before using it

again.

SAVE THESE INSTRUCTIONS