Drucker Diagnostics 642B Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt diagnostyczny Drucker Diagnostics 642B. Drucker Diagnostics 642B 16 stron.

AUTION AND

• This device is intended to be operated by properly trained personnel

who have carefully read the operating manual and are familiar with the

function of the device.

• For the safety of both the operator and service personnel, care should

be taken when using this centrifuge if handling substances that are

known to be toxic, radioactive or contaminated with pathogenic

microorganisms. When Risk Group II materials are used, (as identified in

the World Health Organization "Laboratory Bio-Safety Manual"), a Bio-

Seal should be employed. The Bio-Seal accessory for the model is the

non-aerosol shield cap with appropriate tube holders (contact Drucker

Diagnostics to purchase). In the event that materials of a higher risk

group are being used, more than one level of protection must be

provided.

• The use of flammable or explosive materials as well as those materials

which have a vigorous chemical reaction is prohibited.

• For your safety and the durability of your machine, never transport or

store centrifuge with tube holders inside machine.

• Inspect centrifuge for cracks or physical damage to cabinet, lid, rotor, or

tube holders. Damage may result in unsafe operation. Discontinue use

until repairs have been performed.

• Users should also comply with the specimen receptable manufacturer's

specific instructions for use, in addition to any other protocols

established by the testing organization

Page | 1 Drucker Diagnostics +1-814-692-7761 - [email protected]

ARNING

TATEMENTS