Anntlent AN-CPAL45 Plus Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz Anntlent AN-CPAL45 Plus. Anntlent AN-CPAL45 Plus 9 stron. Cell phone signal booster
Drukuj stronę
Introduction
With the popularity of mobile communications, people want to make a call anytime, anywhere, so
the coverage requirement of communication network is higher and higher, but the reality is not so,
sometimes mobile phone signal is not very good, you want to make a smooth call, even in some places
cell phone cannot dial out. in this cases, cell phone signal booster can solve this problem in a certain
extent.
Features
■ AGC(Automatic Gain Control): When the downlink output signal is too strong or self- oscillated, the
uplink and downlink can automatically reduce the gain and reduce the interference signal
■ Self- Oscillation elimination: The system detects self- Oscillation, first reduces the link gain, then
detects the loop, and finds that the self- oscillation is eliminated, the system returns to normal working
state, otherwise, the power is turned off to prevent interference signal.
■ Inactivity Mode: When no user calls, the device is in standby mode, the uplink power amplifier is
switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving.
SAFETY WARNINGS
WARNING:
This equipment should be installed and operated with minimum distance 20cm （8
inches）between the radiator& your body.
FCC Cautions:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
2 / 9