Anntlent AN-CPAL45 Plus Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz Anntlent AN-CPAL45 Plus. Anntlent AN-CPAL45 Plus 9 stron. Cell phone signal booster
Drukuj stronę
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instruction for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other
Antenna or transmitter.
PACKAGE CONTENTS
(1) Packages include the following：
① 1Pcs AN-CPAL45 Plus Booster with FME Male connectors.
② DC Car Charge.
③Screws Mounting Kits.
④User manual (this document).
(2) Booster interface description:
LED light：
The corresponding LED on the right is used to indicate the following different working
conditions of the booster.
LED Indicator
LED LIGHT
②Power supply jack:
③INDOOR and OUTDOOR port：
antennas.
(3)Antennas and Cables:
In order to use the Booster, you still need the corresponding indoor antenna 1pcs,
outdoor antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.
Antennas and cables kitting information are as follows
Booster working conditions
Continuous GREEN @normal；
Twinkly GREEN @input signals may be not enough；
Continuous YELLOW @ stronger input signals, AGC is working；
Twinkly YELLOW@ self–oscillation happen ,AGC is working.
Continuous RED@ power supply is shut down；
Twinkly RED@ self–oscillation happen but power supply is NOT shut down.
The booster uses a power input range of DC 5-12V.
The two ports are used to connect outdoor and indoor
3 / 9