Daintree GE current WHS100 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria Daintree GE current WHS100. Daintree GE current WHS100 9 stron. Wireless high bay sensor

Drukuj stronę

Daintree

Wireless High Bay Sensor (WHS100)

Wiring

High Voltage

Black

Active/Hot

White

Neutral

Red

Switched

low Voltage

Gray

Analog Ground

Violet

0-10V Analog output (dimming)

Wiring for Dimming + On/Off

Wiring for Non-Dimming

Wiring for Emergency Lighting

Emergency Fixture and Regular Fixture: Wiring to Dim

while Regular Power is Available

In the wiring diagram below, the WHS100 is powered by the

Regular power circuit. While Regular power is supplied, the

WHS100 provides switched On/Off power to the Regular Fixture

and controls dimming to the Regular and the Emergency Fixture.

Loss of Regular power to the WHS100 disables dimming control,

causing the emergency fixture to operate at maximum output.

The Emergency Fixture is powered by Emergency power. Loss of

Regular power to the WHS100 disables the WHS100 dimming

control, so the Emergency Fixture operates at maximum output.

Advisory-Emergency circuit WHS-RRUX wiring

160330 document

In the diagram below, the WHS100 is powered by the Emergency

power circuit. While Regular power is supplied to the RRU the

WHS100 provides switched On/Off power to the fixture and

controls dimming.

When the RRU senses loss of Regular power, the RRU passes

Emergency power directly to the fixture and disconnects the

WHS100 switched output. Loss of Regular power to the RRU-2

disables the WHS100 dimming control, so the fixture operates

at maximum output.

Installation Guide