DSC LCD 5500 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Panel sterowania DSC LCD 5500. DSC LCD 5500 17 stron. Security station for power 832 security system
Również dla DSC LCD 5500: Instrukcja obsługi (20 strony)

DSC LCD 5500 Podręcznik

Disarming

Enter the premises only through the door(s) designated by your installer as the entry door(s).
Entering by any other door will sound an immediate alarm.
Upon entering through the designated entry door, the keypad display will begin to sound an audible
warning and display the following message..

If an Alarm Sounds

Fire Alarm

If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow
your emergency evacuation plan immediately. See guidelines for Family Escape Planning elsewhere
in this manual.

Intrusion Alarm

If an intrusion alarm sounds (continuous bell/siren), the alarm may be silenced by entering your
security code. Transmission to the monitoring station will NOT be interrupted by silencing the alarm
unless a transmission delay is put in by your installer. If the alarm was unintentional, notify the
monitoring service or local authorities immediately.
You may determine the source of the alarm by going to the Alarm Viewing section. Once the source
of the alarm has been corrected, the panel can be restored to its original armed state.
6
If an error is made in entering the code, press the [#] key and enter the code
again.
The correct security code must be entered before the "entry" time expires
or the system will go into alarm. Your installer can change the entry time. If no
alarms occurred while the panel was armed, and there are no troubles, the
display will read..
After about 5 seconds this message will be displayed and the system will be
disarmed.
Upon disarming and if an ALARM occurred during the period the system was
armed, this message will be displayed.
After viewing alarms and if a zone is still in alarm, the display will show this
message to indicate that a zone is open.
Upon Disarming and if a TROUBLE is present, this message will be displayed.