Ansmann Racing xBase Multi Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Ansmann Racing xBase Multi. Ansmann Racing xBase Multi 16 stron.
PRODUCT DESCRIPTION
xBase Multi
The
individually or at the same time and in parallel.
INDEX
Function
Input voltage
Output 1 to 5
Output 1 to 5
Output 1 to 5
OPERATION
> Connect the
> Make sure the power indicator (green LED) lights.
> Plug the banana pins of the charging cable into the required output (Red positive to the +pole and Black negative to the – pole of the battery).
> To increase the charging current, several outputs can be used parallel. (2 outputs 70 mA generate 140 mA).
> Check that the appropriate green LED lights to signal the charging process has begun.
> If the power indicator (green LED) goes out as soon as the battery is connected, it signals wrong polarity or short-circuit.
> To terminate charging disconnect the charger from the mains first and then remove the battery pack from the charger.
CONTENTS SUPPLIED
xBase Multi
1 x Charger
1x Operating Instructions
DISCLAIMER
Information in these operating instructions can be changed without prior notice. ANSMANN ENERGY cannot accept liability for direct, indirect,
accidental or other claims or consequential damages originated by using this charger and information given in these operating instructions.
ANSMANN ENERGY GmbH
Industriestrasse 10
D-97959 Assamstadt / Germany
e-Mail: [email protected]
www.ansmann-energy.com
Technical details subject to change without prior notice. No liability accepted for typographical errors or omissions. 01/2007
1_manual_xbase_multi_07-02.indd 5
1_manual_xbase_multi_07-02.indd 5
charger is suitable for charging most NiCd and NiMH batteries packs with 4-10 cells in the R/C field. All 6 outputs can be used
Parameter
230 V 50 Hz
Battery correctly connected
Battery connected with wrong polarity
Battery, or output connectors short circuited
xBase Multi
charger to the 230 V 50Hz mains socket.
green LED does not light
green Power LED turns off
green LED does not light
green Power LED turns off
Prozessfarbe Schwarz
Prozessfarbe Schwarz
Action
green LED lights
green LED lights
21.02.2007 17:13:59 Uhr
21.02.2007 17:13:59 Uhr
5