Ansmann Racing xBase Multi Інструкція з експлуатації Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Зарядний пристрій Ansmann Racing xBase Multi. Ansmann Racing xBase Multi 16 сторінок.

Друкувати сторінку

PRODUCT DESCRIPTION

xBase Multi

The

individually or at the same time and in parallel.

INDEX

Function

Input voltage

Output 1 to 5

OPERATION

> Connect the

> Make sure the power indicator (green LED) lights.

> Plug the banana pins of the charging cable into the required output (Red positive to the +pole and Black negative to the – pole of the battery).

> To increase the charging current, several outputs can be used parallel. (2 outputs 70 mA generate 140 mA).

> Check that the appropriate green LED lights to signal the charging process has begun.

> If the power indicator (green LED) goes out as soon as the battery is connected, it signals wrong polarity or short-circuit.

> To terminate charging disconnect the charger from the mains first and then remove the battery pack from the charger.

CONTENTS SUPPLIED

xBase Multi

1 x Charger

1x Operating Instructions

DISCLAIMER

Information in these operating instructions can be changed without prior notice. ANSMANN ENERGY cannot accept liability for direct, indirect,

accidental or other claims or consequential damages originated by using this charger and information given in these operating instructions.

ANSMANN ENERGY GmbH

Industriestrasse 10

D-97959 Assamstadt / Germany

e-Mail: [email protected]

www.ansmann-energy.com

Technical details subject to change without prior notice. No liability accepted for typographical errors or omissions. 01/2007

1_manual_xbase_multi_07-02.indd 5

charger is suitable for charging most NiCd and NiMH batteries packs with 4-10 cells in the R/C field. All 6 outputs can be used

Parameter

230 V 50 Hz

Battery correctly connected

Battery connected with wrong polarity

Battery, or output connectors short circuited

xBase Multi

charger to the 230 V 50Hz mains socket.

green LED does not light

green Power LED turns off

green LED does not light

green Power LED turns off

Prozessfarbe Schwarz

Action

green LED lights

21.02.2007 17:13:59 Uhr