Boulevard DVP36LPKR-1 Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria do kominków Boulevard DVP36LPKR-1. Boulevard DVP36LPKR-1 8 stron. Porcelain panel kit
Drukuj stronę5. Hold the front of the panel against the side retainer
bracket, then shift the side panel reward to engage the
rear tabs and slots. At the same time, hook the front
flange of the side panel over the side retainer bracket.
See Figures 5 and 6.
6. Once the panel is properly positioned, install one 5/16
X 1/2" screw through the top extended tab into the pilot
hole located at the top right corner of the Rear liner
panel to secure. See Figure 6.
36468-2-0220
Figure 5
TOP VIEW:
FRONT OF SIDE
LINER ENGAGING
THE RETAINER
BRACKET
Figure 6
Empire Comfort Systems Inc. • Belleville, IL
7. Check to make sure the insulation is secured to the back
prior to installing the Left Side Panel. To install the Left
Side Panel, place the it so that the two rear tabs align
with the two slots at the left end of the Rear Panel. Hold
the front of the panel against the side retainer bracket,
then shift the side panel reward to engage the rear tabs
and slots. At the same time, hook the front flange of
the side panel over the side retainer bracket. Once the
panel is properly positioned, secure with one 5/16 X
1/2" screw through the top extended tab into the pilot
hole located at the top left corner of the Rear Panel.
See Figure 7.
8. Check to see that all exposed insulation is tucked
behind the side panels. If necessary, trim away the
excess insulation away, using a utility knife.
9. Replace the Light Cover.
10. Add decorative media as desired.
11. Replace Glass Door and Barrier assemblies.
Figure 7
Page 3