DT SWISS RATCHET EXP OS Podręcznik techniczny - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Przełącznik DT SWISS RATCHET EXP OS. DT SWISS RATCHET EXP OS 20 stron.

6. Push the installation cylinder onto the non

drive side of the hub.

→ By using the axle and the installation

cylinder, the hub shell is guided when

the ratchet is screwed on. The ratchet

cannot cant.

7. Tighten the threaded ratchet as tight as

possible by turning the hub clockwise by

hand.

8. Remove the hub from the mounting / dismounting tool and put the tool out of the vice.

2.12 MOUNTING THE BEARING ON THE NON DRIVE SIDE

1. Make sure that the axle is in the hub with

the long side first.

2. Grease the bearing seat and the axle with

universal grease.

3. Push a new bearing on the axle with the

colored side facing outwards.

HXTXXX00N5314S

Ratchet EXP OS - Technical Manual