DTAR Wave-Length Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przetwornik DTAR Wave-Length. DTAR Wave-Length 16 stron. Under saddle transducer

Installing the Optional Volume & Tone Module (Not Included)

We recommend that the V&T Module be installed by a qualiﬁed

technician or luthier. The V&T Module installation is best

performed prior to installing the pickup in the guitar. If the unit

has already been installed in the instrument, it will be necessary

to remove the pickup from the saddle slot, being careful not to

damage or distort the pickup in any way. Next, separate the

battery holder from the guitar body. Finally, remove the outer

fasteners of the end pin jack and carefully remove the entire

pickup/preamp assembly from the guitar.

Remove the chassis cover by removing the two screws.

Remove the jumper wire indicated in the illustration below.

Solder the V&T Module cable following the color code in the

illustration below.