DTG M2 Instrukcja wymiany - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Drukarka DTG M2. DTG M2 8 stron. Printhead cable replacement

M2 (PRINTHEAD CABLE REPLACEMENT)

(Always POWER DOWN printer and UNPLUG before doing any repair work)

4. Carefully slide the "RETAINER BAR" out

5. Insure that the CMYK ink bottles have no pressure by loosening the bottle caps

Fig 1-C

6. Pull the CMYK dampers off one at a time. Then pull the white ink dampers out

are all connected through the White Ink Manifold)

NOTE:

Let the dampers hang loosely over the rag.

CMYK dampers will hang over the LEFT side,

and the WHITE will hang over RIGHT side.

Fig 1-D

Revision Date / Version: 2/13/2014 - 7

(indicated previous page 1-B)

Loosen CMYK caps to insure

that there is no pressure on those

ink lines.

they will all come out together.

"White Ink Manifold"

lift up on this to get the white ink dampers off

(Indicated below 1-C)

(white ink

(Indicated below 1-D)