Bourgault X35 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Mikser muzyczny Bourgault X35. Bourgault X35 6 stron. N-cab components installation for 6000/ 7000 series air seeders
Również dla Bourgault X35: Instrukcja serwisowa (10 strony)

Drukuj stronę

Console Toolbar

The lower Console Toolbar can be accessed

by swiping up from the bottom of the

screen. It will pop up on the bottom of the

screen with the available functions.

Quick Help

Question mark button on the

Console Toolbar toggles on/off

help mode. While in the help mode

a blue question mark is displayed

beside each icon on the screen. To see

description for icon touch blue question

mark beside it. To continue to work turn off

help mode.

Initial One-Time Setup

Select wrench icon to go to Settings page.

1. Change units settings - go to User/

Units.

2. Enable Auto Section Control (ASC)

if using coverage map to turn seeder

on/off. Go to System/Features/

Implement. Also enable Area Counters

to record treated areas for each tank.

3. GPS settings (if used) - go to System/

GPS, enter appropriate GPS settings to

get GPS signal into X35 console.

Note: GPS is the preferred ground speed

source to achieve the best accuracy.

4. Create your speciﬁc tractor proﬁle - go

to Vehicle/New and follow prompts.

5. Create your speciﬁc airseeder tank and

drill proﬁle - go to Implement/New/

Factory and follow prompts. Select

Apollo for ECU type.

6. Detect ECU's following the procedure

in the X35 manual

- ECU

Manage).

7. Verify geometry for each boom. Go to

Implement/Geometry.

P/N 0252-92-03

Assy P/N 0252-93-01

X35 Console

(Section 6.3.2

Quick Reference Guide

(v 4.02)

1. Speciﬁc Seeding Scenario Setup

1. Go to Settings page (wrench icon

in bottom left corner).

2. Select appropriate tank grouping

(how the tanks are actually inter-

connected together) - go to Implement

/Seeder/Granular/Tank Grouping.

SELECT

GROUPING