Bourgault X35 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Mikser muzyczny Bourgault X35. Bourgault X35 6 stron. N-cab components installation for 6000/ 7000 series air seeders
Również dla Bourgault X35: Instrukcja serwisowa (10 strony)
Drukuj stronę5. Area Terminology
A - Area Worked - Displays the calculated
area that the boom has covered includ-
ing any overlapped area and is based on
GPS painted area.
- Displayed on the dashboard for the
current boom displayed on the guid-
ance screen.
- Also displayed on the job statistics
mini-view with a tab to change
between booms.
- Appears for each layer in the job
report. The Applied Rate layers for
each tank account for the on time of
the tanks so may differ slightly from
the Coverage Map layers for each
boom.
The Area Worked is based on GPS painted
area and takes into account curves and turns
so is the most accurate representation of the
area that the product has been applied over!
Older software used to display Covered
Area which did not account for overlap so
was not an accurate representation of the
area that product was actually applied over!
A
B
C
X35 Console
(v 4.02)
B - Boundary Area - Displays the calcu-
lated area within the boundary when
created and is based on GPS.
C - Area Remaining - Displays the calcu-
lated area remaining unpainted within
the boundary when created and is based
on GPS.
D - Treated Area - Displays the calculated
area each tank has applied product over
based on the width of the boom and the
distance travelled based on speed and
time.
- Displayed on the job area counters
and implement area counters for
each tank in the seeder controller
screen.
- Appears for the summary of each
tank at the end of the job report.
Treated Area in the Job Area Counter
should be close to Area Worked but will
differ due to calculation not being as ac-
curate as GPS (if certain tanks are switched
off for extended periods then it would dif-
fer more substantially).
If using manual speed or wheel speed and
they are slightly out the Treated Area will
become less accurate.
D
E
Quick Reference Guide
H
G
D
E
A
C
5
Page