Auber WS Series Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler temperatury Auber WS Series. Auber WS Series 18 stron. Precision pid temperature controller

Drukuj stronę

1) Description of the controller.

Figure 1. Front Panel

(1) Parameter Window (LED) - for displaying temperature values and controller's

system parameters.

(2) Output status indicator - In normal mode, this LED indicates the heater status.

When it is on (lit), the heater is powered. When it is off, the heater power is off. When

it is flashing, it means the heater is on and off intermittently to reduce the power

output. It should be synchronized with the power light on the cooking device.

(3) SET Key - for showing current temperature settings, getting into parameters

setting mode and confirming various actions taken.

(4) "+" Key - To increment displayed value.

(5) "-"Key - To decrement displayed value.

(6) Time Key - Change the Parameter Window between current timer and

temperature values, when pressed.

(7) Alarm indicator - Lit when the alarm is on.

(8) Timer status indicator - In normal mode, when "(8)" is on and "(9)" is flashing,

LED shows the time passed since it's powered on.

(9) Mode indicator - the small "dot" is used to indicate what mode the controller is in.

• When it is flashing and "(8)" stays on, "(1)" is the time that has elapsed since

it's powered on.