Auber WS Series Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler temperatury Auber WS Series. Auber WS Series 18 stron. Precision pid temperature controller

Drukuj stronę

power to the cooker 1200 minutes after it is powered up. It will display "End" on the

window and send an audio beeping sound. Turning off the power and on again will reset

the timer.

b) Use it as a clock. Instead of using the timer function, many users just use it as a clock

to find how long the food has been cooked. To use it as a clock, set the time longer than

you need to use, or, just set the timer at 9999 minutes. During the operation, press the

"time" button once will change the display from temperature of the pot to the time that

has elapsed since powered up. Press the "time" button again will change the display

back to temperature.

3.4 Tuning the controller

This controller is shipped with parameters set for commercial rice cooker. You can try to

use this setting for other cooking device also because the setting it suitable for a typical

slow response and balanced system. If you feel the performance is not ideal, you can try

to use the recommended PID parameters listed in Table 1. These are the parameter we

obtain from tuning the system manually. If your cooker is not listed in the Table 1 of our

pre-selected cookers, or the PID parameters we provided are not working for your liking,

you can use the auto-tuning function to let the controller to determine the PID

parameters automatically. You can also manually tune the PID parameter if you are

familiar with PID control technology. To activate the auto-tuning processes or change the

P, I and D parameters, please see next section and Fig 5.

Symbol

Display

Commercial Rice cooker, steam table

Home use rice cooker,

Home use rice cooker, wine fermentation. (PD

mode) Switch set at Warm position

Slow cooker, 7 quart

Slow cooker, 4 quart

Slow cooker, PD mode (low overshoot)

Bradley Smoker

Table 1. Recommended PID parameters that can be used as reference point.

Please note that the P value in table is in Fahrenheit unit. If the controller is using

Celsius unit, divide the P value by 1.8. If you switch from Fahrenheit display to

Celsius, the controller will automatically convert all the settings.

180

700

180

700

600

150