DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Instrukcja instalacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt nagrywający DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 stron. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface
Drukuj stronęInstallation Guide AX Center
Analogue Output
Connections
Doc no. AXCNTR-8001-A-4
MADI connectors
Coaxial BNC connector for input and output of MADI signals via
75Ohm Coax cables.
Sync connectors
Coaxial BNC connector for Clock input synchronization, and Word
Clock output
The input clock format can be Word Clock or Video Black
and Burst (VBB)
ADAT Connectors
Two TOSLINK Inputs and two outputs. Input and output
connectors support ADAT.
S/PDIF is supported on input only.
Analogue output on Jack Connectors
Two sets of ¼" jack connectors for analogue stereo outputs are
available. The connections are balanced and with the following
pinning:
Pin 1 (tip).
Signal+
Pin 2 (ring).
Signal-
Pin 3 (body)
Signal GND
Rev. date 221023
.
Page 14 of 19