DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 설치 매뉴얼 - 페이지 14
{카테고리_이름} DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 페이지. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface
페이지 인쇄Installation Guide AX Center
Analogue Output
Connections
Doc no. AXCNTR-8001-A-4
MADI connectors
Coaxial BNC connector for input and output of MADI signals via
75Ohm Coax cables.
Sync connectors
Coaxial BNC connector for Clock input synchronization, and Word
Clock output
The input clock format can be Word Clock or Video Black
and Burst (VBB)
ADAT Connectors
Two TOSLINK Inputs and two outputs. Input and output
connectors support ADAT.
S/PDIF is supported on input only.
Analogue output on Jack Connectors
Two sets of ¼" jack connectors for analogue stereo outputs are
available. The connections are balanced and with the following
pinning:
Pin 1 (tip).
Signal+
Pin 2 (ring).
Signal-
Pin 3 (body)
Signal GND
Rev. date 221023
.
Page 14 of 19