ADDER AdderLink X-Series Podręcznik - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik dla Nadajnik ADDER AdderLink X-Series. ADDER AdderLink X-Series 18 stron. Usb extender
Również dla ADDER AdderLink X-Series: Podręcznik (15 strony)
Drukuj stronęConnections
The naming of the LOCAL and REMOTE modules relate to their proximity to the
computer system.
PC
S E R I E S
LOCAL Module
connects to the PC
Hence, the LOCAL module connects directly to the system, while the REMOTE is
at the other end of the twisted pair cable(s) and attaches to the video monitor,
USB peripherals and sound equipment.
Connections at the LOCAL module
When using the full capabilities of the X-Series USB extender modules, the
following connections are made to the LOCAL module:
• Video - see right
•
USB
•
Audio
•
Twisted pair link(s)
•
Optional power supply
Cables can be attached in any order, not necessarily the order shown in this
section.
Note: Wherever possible, ensure that the PC system is switched off when
connecting cables.
Installation Advice
• For correct operation, the local and remote units must have ground
connections. At the computer end, this is achieved by ensuring that the
computer or KVM switch that the AdderLink is connected to has a ground
connection. At the keyboard / monitor / mouse end, this can be achieved
by ensuring that the AdderLink's power supply is connected to a grounded
power outlet. Alternatively, a ground connection will be made via the
monitor, if the monitor is itself grounded.
• Try to avoid laying the interconnect cable alongside power cables where
possible.
User
S E R I E S
REMOTE Module
connects to the
peripherals by the user
Video
1 Locate the supplied video cable and attach one end to the connector
marked
on the LOCAL module.
2 Attach the other end of the video cable to the video output port of the host
PC.
5