ADDER AdderLink X-Series Manuel - Sayfa 6

Verici ADDER AdderLink X-Series için çevrimiçi göz atın veya pdf Manuel indirin. ADDER AdderLink X-Series 18 sayfaları. Usb extender
Ayrıca ADDER AdderLink X-Series için: Manuel (15 sayfalar)

Sayfayı Yazdır

Connections

The naming of the LOCAL and REMOTE modules relate to their proximity to the

computer system.

S E R I E S

LOCAL Module

connects to the PC

Hence, the LOCAL module connects directly to the system, while the REMOTE is

at the other end of the twisted pair cable(s) and attaches to the video monitor,

USB peripherals and sound equipment.

Connections at the LOCAL module

When using the full capabilities of the X-Series USB extender modules, the

following connections are made to the LOCAL module:

• Video - see right

•

USB

•

Audio

•

Twisted pair link(s)

•

Optional power supply

Cables can be attached in any order, not necessarily the order shown in this

section.

Note: Wherever possible, ensure that the PC system is switched off when

connecting cables.

Installation Advice

• For correct operation, the local and remote units must have ground

connections. At the computer end, this is achieved by ensuring that the

computer or KVM switch that the AdderLink is connected to has a ground

connection. At the keyboard / monitor / mouse end, this can be achieved

by ensuring that the AdderLink's power supply is connected to a grounded

power outlet. Alternatively, a ground connection will be made via the

monitor, if the monitor is itself grounded.

• Try to avoid laying the interconnect cable alongside power cables where

possible.

User

S E R I E S

REMOTE Module

connects to the

peripherals by the user

Video

1 Locate the supplied video cable and attach one end to the connector

marked

on the LOCAL module.

2 Attach the other end of the video cable to the video output port of the host

PC.