Anycom BSH-08 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zestawy słuchawkowe Anycom BSH-08. Anycom BSH-08 7 stron. Bluetooth stereo headset
Drukuj stronęPage 3
3. Charging the Headset
Make sure that your headset is fully charged before start using it.
When your headset is charging, the red LED is steady on. When it is fully charged the LED is off. A full charge will take approximately 2.5 hours.
When the battery needs to be recharged, the LED will blink in red 3 times every 5 seconds.
4. Turn your Headset on/off
To turn your headset on switch the On/Off switch to "ON" (1). A signal tone will confirm that the headset is switched on now. The blue LED will blink slowly. Note: LED
flashes in blue and red at that time you first use your headset.
To turn your headset off switch the On/Off switch to "OFF" (2). All LED will go off.
5. Pair to your Bluetooth Phone
Before using your headset for the first time, you should pair your headset with the device that you want to use with, such as your Bluetooth phone.
When you use your headset for the first time switch it on and place your headset and Bluetooth phone within 10 meters / 30 feet distance. Pairing-modus of your headset
will be automatically activated when using the headset for the first time. The LED flashes in blue and red.
If you do not use your headset for the first time hold the MFB (1) button 5 seconds till LED flashes in blue and red.
English
Bluetooth Stereo Headset BSH-08