Anycom BSH-08 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zestawy słuchawkowe Anycom BSH-08. Anycom BSH-08 7 stron. Bluetooth stereo headset
Drukuj stronęAfter that follow the instructions from the user manual of your Bluetooth phone to select a Bluetooth connection. Look with your Bluetooth phone for the stereo headset
"BSH-08". When your Bluetooth phone has found the stereo headset enter the PIN code "0000" (4 zeros) in your phone. When pairing/ connect is successful the blue LED
flashes 2 times every 5 seconds.
Once you pair the headset with a device, the headset will be automatically connected to the device whenever you turn the headset on.
6. Reset your Headset
To reset your headset hold the
devices are deleted now. When you switch your headset off and then switch it on again, the pairing modus will be activated automatically. The LED flashes in blue and red.
7. Making a Phone Call
• Dial a number on the keypad of your Bluetooth phone and press the call button for making an outgoing call. The Bluetooth phone will automatically transfer the call to
your headset. Tap the MFB to end the active call.
• Tap the MFB once to pick up an incoming call. Tab again to end the active call.
• Hold the MFB for 1 second to reject an incoming call.
• Press the MFB 3 short times to mute the microphone during an ongoing call. Press the MFB 3 short times again to un-mute.
8. Advanced Call Features
• Voice dialing
- Hold the volume down button down for 3 seconds for de-/activation.
• 3-way calling
- Hold the volume Button + for 3 seconds to put an active call to hold and to accept waiting call
- Hold the volume Button + to place active calls to hold and to accept the held call.
- Press the
Button for 1 second to reconnect to the last dialled party member.
• Transferring a call
- Hold the MFB for 1 second to transfer the call from the phone to your headset.
- Hold the MFB for 1 second to transfer the call from the headset to your phone.
• Last number-redial
- Hold the
Button for 1 second
• Last received number-redial
- Hold the
Button for 1 second
Bluetooth Stereo Headset BSH-08
Button and the – Button together at the same time for 5 seconds. After that 3 short tones will follow and your headset is reset. All paired
Page 4
English