Anyload EC200 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wagi Anyload EC200. Anyload EC200 8 stron.
Również dla Anyload EC200: Instrukcja obsługi (16 strony)
Drukuj stronę
4. Preparation
Put the scale
on a flat level
the red circle (See Fig.1).
Correct
5. Keypad Function
5.1 <Scale/ select>: Press this button to select available counting scale among
scale 1, scale 2 and scale 3. You only can choose to use one of them at the
same time.
SCALE 1: Main counting scale, the bigger platform one.
SCALE 2: Smaller Counting scale offers more accurate data.
SCALE 3: Extra connection platform. If you need the sample weight from
SCALE 2, you can use this platform to count more by putting on more samples.
5.2 <Zero>: Press this button
capacity). ZERO LED indicator will be on when it is activated.
5.3 <Tare>: Press this button to enable Auto-Tare function (range < 100% of full
capacity). TARE LED indicator will be on when it is activated.
5.4 <Units>: In weighing
units. In counting mode, this button will be disabled.
Page 4 of 8
and adjust the feet to make the level bubble
incorrect
(Fig.1)
to reset the scale to zero
mode, press this button to switch units among all the
align within
(range<10% of full
AL-Manual-EC200-En-101