Anyload EC200 사용자 설명서 - 페이지 4

{카테고리_이름} Anyload EC200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload EC200 8 페이지.
Anyload EC200에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

4. Preparation

Put the scale

on a flat level

the red circle (See Fig.1).

Correct

5.1 <Scale/ select>: Press this button to select available counting scale among

scale 1, scale 2 and scale 3. You only can choose to use one of them at the

same time.

SCALE 1: Main counting scale, the bigger platform one.

SCALE 2: Smaller Counting scale offers more accurate data.

SCALE 3: Extra connection platform. If you need the sample weight from

SCALE 2, you can use this platform to count more by putting on more samples.

5.2 <Zero>: Press this button

capacity). ZERO LED indicator will be on when it is activated.

5.3 <Tare>: Press this button to enable Auto-Tare function (range < 100% of full

capacity). TARE LED indicator will be on when it is activated.

5.4 <Units>: In weighing

units. In counting mode, this button will be disabled.

Page 4 of 8

and adjust the feet to make the level bubble

incorrect

(Fig.1)

to reset the scale to zero

mode, press this button to switch units among all the

align within

(range<10% of full

AL-Manual-EC200-En-101