DuctSox SkeleCore Pull-Tight Cable Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Urządzenia przemysłowe DuctSox SkeleCore Pull-Tight Cable. DuctSox SkeleCore Pull-Tight Cable 16 stron.
Drukuj stronęSkeleCore Pull-Tight Cable
Attach the Tension Clips of the fabric to the Tensioning Basket. Complete the connection by zippering the duct to the Inlet
Belt.
To complete the first Tensioned Section, repeat the process going in the other direction, after you zipper the two sections of
fabric together.
Tension Clips in System
Pull back on Tensioning Basket
Before Tensioning
NOTE: Make sure the lock lever is engaged prior to pulling back on basket.
10
Installation Manual
Top Zipper, Open
D. Tension Fabric.
The amount of take-up will vary based on the length of the Tensioned Section. As
tension is applied, wiggle your DuctSox to evenly distribute fabric tensioning over entire
length. Tension the fabric until the desired roundness and tautness of the fabric is
achieved.
Lever Engaged
Top Zipper, Closed
INCORRECT
After Tensioning
DuctSox
Publication: AMEN00417 2021-02-22
®