Anywhere Fireplace Hudson Instrukcje instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Kominek wewnętrzny Anywhere Fireplace Hudson. Anywhere Fireplace Hudson 4 stron.

Step 6

Insert burner (Part C) into the recess space in the fireplace body.

Step 7

Carefully pour in the liquid ethanol fuel using the funnel

provided (Part J) and fill approximately ¾ full. If any fuel does

spill, you should always wipe up any spilled fuel prior to

lighting your fireplace. Never overfill. You will notice a

white cloth like material in your burner. Do not remove

this. It is a fiberglass material safe to burn and is

intended to be there for safety and better flames.

Step 8

Using a long lighter or long match, light the fuel in the burner

and ENJOY!

CAUTION: Fireplace will be hot while lit and may stay

hot for a while after extinguishing the flame.

ALWAYS USE CAUTION when lighting the fireplace.

Never fill the burner with more fuel while the fireplace

is still hot or burning. Allow it to cool down before

refilling with fuel.

Step 9

The handle provided (Part I) has holes that will fit over the posts

on the sliding lid of the burner. You can slide the lid of the burner

open or closed to get the desired flame height and heat output.

When you are ready to extinguish the fireplace, use the handle to

slide the lid of the burner completely closed to cut off the oxygen

supply to the fuel. This will snuff out the flame.