Anywhere Fireplace Hudson Інструкція з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішній камін Anywhere Fireplace Hudson. Anywhere Fireplace Hudson 4 сторінки.

Step 6
Insert burner (Part C) into the recess space in the fireplace body.
Step 7
Carefully pour in the liquid ethanol fuel using the funnel
provided (Part J) and fill approximately ¾ full. If any fuel does
spill, you should always wipe up any spilled fuel prior to
lighting your fireplace. Never overfill. You will notice a
white cloth like material in your burner. Do not remove
this. It is a fiberglass material safe to burn and is
intended to be there for safety and better flames.
Step 8
Using a long lighter or long match, light the fuel in the burner
and ENJOY!
CAUTION: Fireplace will be hot while lit and may stay
hot for a while after extinguishing the flame.
ALWAYS USE CAUTION when lighting the fireplace.
Never fill the burner with more fuel while the fireplace
is still hot or burning. Allow it to cool down before
refilling with fuel.
Step 9
The handle provided (Part I) has holes that will fit over the posts
on the sliding lid of the burner. You can slide the lid of the burner
open or closed to get the desired flame height and heat output.
When you are ready to extinguish the fireplace, use the handle to
slide the lid of the burner completely closed to cut off the oxygen
supply to the fuel. This will snuff out the flame.