Duerkopp Adler 195 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Maszyna do szycia Duerkopp Adler 195. Duerkopp Adler 195 14 stron.
Również dla Duerkopp Adler 195: Instrukcja obsługi (18 strony)
Drukuj stronę
3. Table Top, Completing and Screwing on
8
Underside of the Table Top
Top of the Table
–
Fasten the reinforcement brace 5 with 4
screws between the cutouts of the sewing
head and the belt guard.
–
Mount the oil baffle 4 with wood screws. Align
the oil baffle so that the distance from the right
side of the oil baffle to the table top cutout is
55 mm.
–
Screw on the reinforcement brace 7 behind the
oil baffle.
–
Screw on the cable duct 3 and the holder 6 for
the connection cable strain reliever.
–
Screw on the main switch 2.
–
Screw on the sewing light transformer 1 (if
supplied).
–
Screw on the drawer 8 with its mounting.
Secure the insert plate against displacement
with a nail.
–
Screw the table top onto the frame with B8X35
wood screws.
The position of the table top relative to the
frame is determined by the centering marks on
the underside of the table top.
–
Press the rubber rests for the hinges and the
forward rest points into the table top recesses.
–
Press the plug into the intended hole.
1
2
3
4
5
6
7
7