Duerkopp Adler 195 설치 매뉴얼 - 페이지 7

{카테고리_이름} Duerkopp Adler 195에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 195 14 페이지.
Duerkopp Adler 195에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)

3. Table Top, Completing and Screwing on

Underside of the Table Top

Top of the Table

–

Fasten the reinforcement brace 5 with 4

screws between the cutouts of the sewing

head and the belt guard.

–

Mount the oil baffle 4 with wood screws. Align

the oil baffle so that the distance from the right

side of the oil baffle to the table top cutout is

55 mm.

–

Screw on the reinforcement brace 7 behind the

oil baffle.

–

Screw on the cable duct 3 and the holder 6 for

the connection cable strain reliever.

–

Screw on the main switch 2.

–

Screw on the sewing light transformer 1 (if

supplied).

–

Screw on the drawer 8 with its mounting.

Secure the insert plate against displacement

with a nail.

–

Screw the table top onto the frame with B8X35

wood screws.

The position of the table top relative to the

frame is determined by the centering marks on

the underside of the table top.

–

Press the rubber rests for the hinges and the

forward rest points into the table top recesses.

–

Press the plug into the intended hole.