Duerkopp Adler 550-12-12 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyna do szycia Duerkopp Adler 550-12-12. Duerkopp Adler 550-12-12 15 stron.
Również dla Duerkopp Adler 550-12-12: Instrukcja instalacji (6 strony)
Drukuj stronę
1.3 Technical Specification
2. Operation
2.1 Threading the Needle Thread (Upper thread)
2.2 Threading the Hook Thread (Lower Thread)
6
Machine head:
Needle system:
Needle thickness:
Threads:
Stitch type:
Number of stitches:
Stitch length:
Stitch condensation:
Operating pressure:
Air consumption:
Nominal voltage:
Dimensions:
Caution Risk of Injury !
Turn main switch off.
Thread the upper thread only with the machine switched off.
–
Place the thread spool 1 on the thread stand.
–
Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–
Guide the thread in order through guide plate 3, thread guide 4,
thread tension 8, thread guide 6 and thread drawing plate 7.
–
Guide the thread through thread guide 13 and thread drawing lever
12.
–
Guide the thread through pre-tension 9, thread guide 10 and
needle eye. Cut off the excess thread end.
Caution Risk of Injury !
Turn main switch off.
Thread the lower thread only with the machine switched off.
–
Place the thread spool 2 on the thread stand.
–
Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–
Guide the thread in order through the guide plate 3, thread guide
4, thread tension 5 and lower thread guide 19.
–
Feed the thread through the slot (see arrow) in the thread gutter 18.
–
Remove cover plate 11 and swing holder 14 up out of its catch.
Guide the thread through thread guides 15 and thread drawing
hook 16.
Swing holder 14 back and allow to catch.
–
Pull the thread through the hook 17 with a tweezers and pull tight.
Insert cover plate 11 again.
Class 935 - 940 - 6
934 SIN
Nm 90
As needle and hook thread spun monofilament
sewing yarns
401 double chain stitch
3200 / min (recommended number of stitches
ex works)
2.5 mm for rear feed dog (fixed setting)
Transport length for forward feed dog and
transport foot adjustable up to 6 mm
1.5 mm
6 bar
approx. 0.5 NL per work cycle
1 x 220 - 240 V, 50 / 60 Hz
(H x W x D) 1600 x 1530 x 951 mm