Duevi PEPEROSSO Instrukcja instalacji i użytkowania - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla System bezpieczeństwa Duevi PEPEROSSO. Duevi PEPEROSSO 19 stron. Dissuader with nebulization irritating gas

Drukuj stronę

Technical

Power supply

Absorption

Battery

Inputs

Outputs

Functioning

Installation height

Dimension

Temperature

Accessories

12 V

(max 13,8 V

Standby: 20 mA – Nebulisation: 0,7 A

Lead battery 12 V / 0,8 Ah (not included)

Autonomy (only battery supply, IN1 enabled): about 24 hours

 IN1: BLOCK input TC (to be connected to system status of panel)

 IN2: NEBULISATION READY (to be connected to alarm output of

panel)

 IN3: CONFIRM (to be connected to local detector or remote control

interface)

Confirmation is monitored up to 8 minutes after the end of

NEBULISATION READY signal!

 1 output for power supply 12 V

 1 output for failure of Peperosso

 1 output for nebulisation occurred

Gas nebulisation can occur only when system is armed (IN1 unlocked) and

after activation of IN2 input (alarm) and confirm of IN3 input (local

detector / remote control)

1,5 ÷ 3 m

About 263 x 95 x 80 mm

0 ÷ 40 °C

Provided with 3 chili pepper spray cans (mod. GAS) and 1 test can with

water

)

/ 500 mA (2 A for 100 ms MAX)