Casio 2411 Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Oglądaj Casio 2411. Casio 2411 9 stron.

Drukuj stronę

GENERAL GUIDE

Press D to change from mode to mode.

Timekeeping Mode

' ‰ 1 6 - 3 ‰

P SAT

1 ‰ : 5 8

Press D.

VISUAL DATABANK Mode

Use this mode

to view images

PLAY

in watch

memory, to

3‰

delete images,

to attach text to

images, etc.

IR Mode

IRCOM

CAMERA MODE

Use the Camera Mode to record images.

• The lens for image recording is located on the top edge of the watch.

Note

• Wrist Camera memory can store up to approximately 80 images. The

actual number of images you can store depends on recording conditions. If

you record many brightly lit or colorful images, for example, the total

number of images you can store may be less than 80.

• The above is also true for the remaining memory capacity value. This value

is an approximate number for reference purposes only. Depending on

recording conditions, you may be able to store fewer images than that

indicated on the display.

To record an image

1. Press F to enter the Camera Mode.

• Note that you cannot enter the Camera Mode from the VISUAL

DATABANK Mode and the IR Mode.

• The Camera Mode screen first shows remaining memory capacity for

about one second, followed by the image being picked up by the lens.

Remaining memory capacity

(number of images)

After about

REC

5 ‰

one second

Number of images

in memory

Remaining memory

capacity graph

2. While viewing the image on the display, point the lens of the watch at the

subject whose image you want to record.

3. Press F to release the shutter and record the image.

• This records the image currently on the display and stores it into

memory. The image remains on the display for about three or four

seconds as the record operation is being performed.

Stopwatch Mode

STW

‰H

‰ ‰

‰

Countdown Timer Mode

TMR

‰ ‰

Alarm Mode

ALM1

1 2 : ‰ ‰

OFF

Lens

M3‰ OUT

Remaining Camera

Lighting type

Mode time

Timekeeping Mode

• Pressing B or E while in the Timekeeping Mode displays the

Calendar screen.

' ‰ 1 6 - 3 ‰

Press B or E.

P SAT

1 ‰ : 5 8

Press D.

Timekeeping

• Press D to return from the Calendar screen to the Timekeeping Mode.

Press F.

Camera Mode

• Pressing F in any mode besides the VISUAL DATABANK Mode and

the IR Mode enters the Camera Mode.

' ‰ 1 6 - 3 ‰

REC

P SAT

1 ‰ : 5 8

• Pressing D while in the Camera Mode enters the VISUAL DATABANK

Mode so you can view images you have just recorded.

Note

• All watch button operations are disabled while the record operation is in

progress.

• • • • • The watch stays in the Camera Mode for about one minute after you

enter it. Then it automatically enters the VISUAL DATABANK Mode

and displays the last image recorded. See "Camera Rest Interval" for

more information.

• The message REC FULL appears on the display to indicate that memory

is full. You will not be able to record an image while this message is

displayed. If this happens, delete images you no longer need to make

room for more images.

Camera Mode Precautions

General

• Never touch the surface of the lens. Fingerprints or dirt on the lens can

cause poor performance of the camera function. To clean the lens surface,

use a camera lens blower to blow off any dirt or dust particles, and then

wipe with a soft, dry cloth.

• Take care that you do not accidentally move the watch when you press F

to release the shutter.

• Insufficient lighting can result in poor images. Shoot in daylight whenever

possible. At night, shoot indoors in a well-lit area.

Camera Rest Interval

Camera Mode operations consume considerable battery power. To protect

against premature rundown of its battery, the watch automatically goes into a

rest interval, during which you will be unable to re-enter the Camera Mode

after you exit it. The length of the rest interval is equal to the amount of time

you spent in the Camera Mode before you exited it. This means that if you

exit the Camera Mode after being in it for 20 seconds, you will be unable to

re-enter the Camera Mode for about 20 seconds.

If you try to enter the Camera Mode during a

Remaining rest interval

rest interval, the message WAIT appears on

time indicator

the display, along with a countdown of the

remaining rest interval time.

REC

• The maximum rest interval is 60 seconds.

Remaining rest interval time

WAIT 38

Displayed Image Size and Memory Image Size

Though the size of images displayed by this watch is 120 × 120 dots, the size

of the image stored in memory is 176 × 144 dots. This means that after you

transfer images to your computer or another device, you can display them

176 × 144 dots.

2411-2

2 ‰ ‰ 1 / 6

Calendar

5 ‰

M3‰ OUT