Danfoss FP975 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Termostat Danfoss FP975. Danfoss FP975 16 stron. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Również dla Danfoss FP975: Instrukcja instalacji (16 strony), Instrukcje użytkownika (2 strony)
Drukuj stronę
c) DAY to advance to the next
day.
Alternatively press COPY to
keep the same settings as the
day before.
4.
Press the PROG button to
return the unit to RUN mode
GB
(time appears and colon in the
display begins to fl ash).
5.
Proceed to 'Programming the
Hot Water' below.
1.7.3 Programming the Hot Water
To set the hot water programme
press the PROG button until SET HW
ON TIME appears on the display.
Set the hot water programme
in the same way as the heating
programme, using:
a)
+ and - buttons to alter the
time,
b)
pressing the NEXT ON/OFF
button to move to the next
setting,
c)
pressing DAY to advance
through days of the week
(7 day mode) or to advance
to
programming (5/2 day mode).
Finally press PROG to return the
unit to run mode (time appears and
colon in the display begins to fl ash).
12
Saturday
and
Sunday
FP975