Danfoss FP975 사용자 설명서 - 페이지 12

{카테고리_이름} Danfoss FP975에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss FP975 16 페이지. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Danfoss FP975에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 사용자 지침 (2 페이지)

Danfoss FP975 사용자 설명서
c) DAY to advance to the next
day.
Alternatively press COPY to
keep the same settings as the
day before.
4.
Press the PROG button to
return the unit to RUN mode
GB
(time appears and colon in the
display begins to fl ash).
5.
Proceed to 'Programming the
Hot Water' below.

1.7.3 Programming the Hot Water

To set the hot water programme
press the PROG button until SET HW
ON TIME appears on the display.
Set the hot water programme
in the same way as the heating
programme, using:
a)
+ and - buttons to alter the
time,
b)
pressing the NEXT ON/OFF
button to move to the next
setting,
c)
pressing DAY to advance
through days of the week
(7 day mode) or to advance
to
programming (5/2 day mode).
Finally press PROG to return the
unit to run mode (time appears and
colon in the display begins to fl ash).
12
Saturday
and
Sunday
FP975