Danfoss FP975 사용자 설명서 - 페이지 11

{카테고리_이름} Danfoss FP975에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss FP975 16 페이지. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Danfoss FP975에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 사용자 지침 (2 페이지)

페이지 인쇄
Danfoss FP975 사용자 설명서

1.7.2 Programming the heating in 7 day mode

1.
Press PROG until SET CH ON
TIME appears at the top of the
display and MO appears at the
bottom of the display.
Use the + and - buttons to set
the time you want your heating
to fi rst come on in the morning
(Event 1).
2.
Press NEXT ON/OFF to move
to Event 2.
Continue programming the
heating ON and OFF times in
this way by using the + and
- buttons to set the time you
want and pressing the NEXT
ON/OFF button to move to the
next setting.
3.
Press DAY button once only.
TU will appear at the bottom of
the display.
Continue programming the
rest of the week by pressing:
a) NEXT ON/OFF button to
move to the next setting,
b) + and - buttons to amend
the time,
Danfoss Heating
GB
11