Free The Tone Arc-53m Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający Free The Tone Arc-53m. Free The Tone Arc-53m 16 stron. Audio routing controller

Drukuj stronę
Detailed setup of the ARC-53M is done in Edit mode. The following tables explain configurations available in Edit mode and how to set them.
To keep this manual simple and easy to understand, some descriptions for setup procedures are simplified. To enter Edit mode, hold down
the MODE (EDIT/EXIT) switch for three seconds. When the display shows "MN", select a menu item assigned to the corresponding PS/L
switch.
Hold down the MODE switch to put the ARC-53M in Edit mode
Press the MODE switch to return to Preset mode from Edit mode
The following terms are used in the explanations for setup procedures.
• ENTER: Press the ENTER switch located on the control panel to confirm your selection.
• Set: Press the INC/+ or DEC/– switch on the control panel until the desired value or item is shown in the display.
• Parameter: Values or items that can be changed by users.
• Default: Parameter settings configured before shipment from factory.
The following abbreviations are used to show labels on the display:
[FR]: FROM
[YS]: YES
PRESET (PS1/6/L1 footswitch)
Select Switch
Menu
PRESET COPY [CP]
This item is used to copy the contents of a preset
1
to another preset.
BANK COPY [BC]
This item is used to copy the contents of a bank to
2
another bank.
PRESET DELETE [DL]
This item is used to delete the contents of the
3
specified preset.
BANK DELETE [BD]
This item is used to delete the contents of the
4
specified bank.

EDIT MENU

Set each parameter value.
Use the PS/L switches to select menus
[ER]: ERROR
Use the Select Switch to select the desired menu item.
How to Set
[CP] on  ENTER  FR [PRESET NUMBER] flashes 
Set  ENTER  TO [PRESET NUMBER] flashes  Set 
ENTER
Parameter: [01–200] (default: 01)
[BC] on  ENTER  FR [BANK NUMBER] flashes  Set 
ENTER  TO [BANK NUMBER] flashes  Set  ENTER
Parameter: [0–19] (default: 0)
[DL] on  ENTER  [PRESET NUMBER] flashes  Set 
ENTER
Parameter: [01–200] (default: 01)
[BD] on  ENTER  [BANK NUMBER] flashes  Set 
ENTER
Parameter: [0–19] (default: 0)