Free The Tone Arc-53m Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający Free The Tone Arc-53m. Free The Tone Arc-53m 16 stron. Audio routing controller

MIDI (PS2/7/L2 footswitch)
Select Switch
Menu
MIDI Rx [RC]
This item is used to set the MIDI receive channel.
1
CSW CC# [CC]
This item is used to set the MIDI control change
number to be sent.
2
Up to 4 control switches (CSW1–CSW4) can be
set. MIDI control change number and MIDI channel
can be set for each CSW (control switch).
CSW SWITCH TYPE [ST]
This item sets the operation type of the CSW
(control switch) specified by item 2 above.
3
Available operation types are: Latch, Momentary,
and On Send in which only the maximum value is
sent when the LED is turned on.
Control Change Number [CN]
This item is used to set the control change number
assigned to each function.
4
MIDI OUT/THRU [OT]
5
This item is used to set the operation mode of the
MIDI OUT/THRU terminal.
How to Set
[RC] on  ENTER  [OM] flashes  Set  ENTER
Parameter: CH1 [C1] to CH16 [C16], OMNI [OM], OFF [OF]
(default: OMNI [OM])
[CC] on  ENTER  [S1] on  Set (param1)  ENTER 
[OFF] flash  Set (param2)  ENTER  [CH01] flashes 
Set (param3)  ENTER
Parameter 1: CSW1 [S1] to CSW4 [S4]
Parameter 2: 000 to 120, OFF [OF] (default: OFF [OF])
Parameter 3: CH1 [C1] to CH16 [C16] (default: CH1 [C1])
[ST] on  ENTER  [S1] flashes  Set (param1) 
ENTER  [LT] flashes  Set (param2)  ENTER
Parameter 1: CSW1 [S1] to CSW4 [S4]
Parameter 2: LATCH [LT] / MOMENTARY [MO] / ON SEND
[OS] (default: LATCH [LT])
* This menu is used to edit CC# assigned to each function.
[CN] on  ENTER  [L1] on  Set (param1)  [OF] flashes
 Set (param2)  ENTER
Parameter 1: LOOP1 [L1] to LOOP5 [L5]
MUTE [MT]
MODE [MD]
CTL1 [C1] to CTL3 [C3]
Parameter 2: 000 to 120, OFF [OF] (default: OFF [OF])
Items with initial settings
CTL1 [C1] 000 to 120, OFF (default: 113)
CTL2 [C2] 000 to 120, OFF (default: 114)
CTL3 [C3] 000 to120, OFF (default: 115)
[OT] on  ENTER  [OT] flashes  Set  ENTER
Parameter: OUT [OT], THRU [TH] (default: OFF [OF])